How to Clean and Maintain the Dyson V11 and v10 Cordless Vacuum

ByRelentlesshome
How to Clean and Maintain the Dyson

Household chores can be cumbersome. Cleaning every corner of the house is no fun at all.

However, with the increasing amount of pollution, it is crucial that you take the right steps in keeping your home clean, especially the carpets, furniture and the curtains, which tend to accumulate a lot of pet hair, dust mites, dander, and other allergens.

The only way to remove these is with a handy vacuum cleaner. If you do not like the bulky and rugged bagged vacuum cleaners, then you can always go with the cordless one like the Dyson V10 or V11. Read Here: How to Unclog a Vacuum Cleaner?

However, to make sure that your home stays dust and germ-free, you will also need to know how to clean a Dyson cordless vacuum.

Here is a guide on how to clean a Dyson cordless vacuum as well as some maintenance tips.

Read More:

1) Emptying and Cleaning The Dirt Bin

How to Clean and Maintain the Dyson

To ensure optimum performance of the Dyson vacuum cleaner, you need to empty the dirt bun as soon as dust and dirt reach the level of the Max mark. Don’t overfill.

Here’s how to clean a Dyson cordless vacuum dirt bin.

Disconnect it from the charger and be careful not to switch the “ON” trigger.

Remove the wand— press the red wand release button and pull away from the bin. To release the dirt, you need to hold the vacuum with the bin in a downward position. Then push the red bin release button, the bin should slide down and cleaning the dirt as it goes.

In order to minimize allergen or dust contact when emptying, tightly encase the clear bin in the plastic bag and empty it.

Once the dirt is removed, it is time to clean the dirt bin using a damp cloth only. Before attaching it back to the machine, make sure that the bin and seals are dry.

2) Cleaning The Brush Bar

The Dyson V10 and V11 Cordless Vacuum Cleaners have 2 washable brush bars you need to check and clean regularly.

Here are the steps on how to clean a Dyson cordless vacuum brush bar:

  • Disconnect the vacuum from the charger.
  • Turn the cleaner head upside down. Using a coin, turn the fastener anti-clockwise until it clicks to an unlocked position.
  • Rotate the end cap to open position and gently slide the larger brush bar away.
  • Remove the end cap then lift out the small brush bar from the octagonal end. Pull away from the cleaner head.
  • Gently remove any dirt or lint as you hold the brush bar under running water.
  • Leave to dry for at least 24 hours.

Read More:

3) Washing The Filter

To wash the filter unit of the Dyson cordless vacuum you need to remove it by twisting it counter clockwise, pulling it away from the main body.

Here are steps on how to clean a Dyson cordless vacuum filter unit:

  • Clean the inside first, holding it upright under the water tap and agitating dirt with a rotating motion.
  • Next, clean the outside by filling the filter unit with water and placing your hand over the opening then shaking gently.
  • Repeat these steps until the water runs clear.
  • After that, tap the filter unit gently to remove excess water.
  • Leave the filter unit to dry for at least 24 hours with the opening facing up.

It is recommended to check and wash the filter unit at least once every month.

4) Removing Blockages

The Dyson V11 and V10 Cordless Vacuum cleaners are fully equipped with automatic cut-out. So, if any part of the vacuum gets blocked, the blockage indicator LED illuminates.

To remove the blockages, allow the appliance to could down first. Make sure that it is not connected to the charging port.

Detach the cleaning wand. Using a flashlight, look inside the tube. Push the blockages out using a straightened coat hanger or the stick of the broom.

In addition, you can also clean the wand with running water and soap.

Leave it to dry before attaching it to the machine and using the vacuum cleaner.

Read More:

Maintenance Tips

1) Charging

Turn off the vacuum cleaner. Place it on the docking station. After that, plug in the docking station and turn it on to charge the vacuum cleaner.

Take note that the vacuum cleaner needs to be fully charged before the first use. Recharging can take up to 3.5 hours.

Use only Dyson chargers to charge your Dyson V10 and V11 cordless vacuum cleaners. Also, use only Dyson batteries since other types of batteries can burst to cause damage and injury to persons.

2) Vacuuming Properly

Here are some tips on how to use the Dyson Cordless Vacuum Cleaners properly:

  • Remove the vacuum cleaner from the docking station.
  • Make it a habit to check the underside of the cleaner tool or head and ensuring that it is free from foreign objects.
  • Before you vacuum, check the recommended cleaning instructions since the brush bar of the vacuum can damage specific floors and carpet types. Also, don’t forget to remove large items such as toys, marbles, and small socks on the floor before vacuuming.
  • Don’t use to pick up water, flammable or combustible liquids, as well as picking up anything smoking or burning such as matches or cigarettes.

Other Tips

  • Do not use without the filter and dust bin in place.
  • Unplug the vacuum cleaner when not in use for long periods of time or before servicing and maintenance.
  • Always turn off the vacuum cleaner before attaching or removing the motorized brush bar.
  • Don’t place the vacuum cleaner on or near a cooker or other hot surface. This is because the battery might catch a fire
  • Contact Dyson when repair or service is needed.
  • Always refer to the user manual since it contains all fundamental information regarding the cleaning, use, and maintenance of the vacuum cleaner.

Read More:

Similar Posts